本当質問と回答の練習モード

現代技術のおかげで、オンラインで学ぶことで人々はより広い範囲の知識（70-595有効な練習問題集）を知られるように、人々は電子機器の利便性に慣れてきました。このため、私たちはあなたの記憶能力を効果的かつ適切に高めるという目標をどのように達成するかに焦点を当てます。したがって、TS　70-595練習問題と答えが最も効果的です。あなたはこのTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010有用な試験参考書でコア知識を覚えていて、練習中にTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験の内容も熟知されます。これは時間を節約し、効率的です。

デモをダウンロードする

信頼できるアフターサービス

私たちの70-595試験学習資料で試験準備は簡単ですが、使用中に問題が発生する可能性があります。70-595 pdf版問題集に関する問題がある場合は、私たちに電子メールを送って、私たちの助けを求めることができます。たあなたが新旧の顧客であっても、私たちはできるだけ早くお客様のお手伝いをさせて頂きます。候補者がTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験に合格する手助けをしている私たちのコミットメントは、当業界において大きな名声を獲得しています。一週24時間のサービスは弊社の態度を示しています。私たちは候補者の利益を考慮し、我々の70-595有用テスト参考書はあなたの70-595試験合格に最良の方法であることを保証します。

要するに、プロの70-595試験認定はあなた自身を計る最も効率的な方法であり、企業は教育の背景だけでなく、あなたの職業スキルによって従業員を採用することを指摘すると思います。世界中の技術革新によって、あなたをより強くする重要な方法はTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験認定を受けることです。だから、私たちの信頼できる高品質のTS有効練習問題集を選ぶと、70-595試験に合格し、より明るい未来を受け入れるのを助けます。

70-595試験学習資料の三つバージョンの便利性

私たちの候補者はほとんどがオフィスワーカーです。あなたはTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験の準備にあまり時間がかからないことを理解しています。したがって、異なるバージョンの70-595試験トピック問題をあなたに提供します。読んで簡単に印刷するには、PDFバージョンを選択して、メモを取るのは簡単です。 もしあなたがTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010の真のテスト環境に慣れるには、ソフト（PCテストエンジン）バージョンが最適です。そして最後のバージョン、70-595テストオンラインエンジンはどの電子機器でも使用でき、ほとんどの機能はソフトバージョンと同じです。TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験勉強練習の3つのバージョンの柔軟性と機動性により、いつでもどこでも候補者が学習できます。私たちの候補者にとって選択は自由でそれは時間のロースを減少します。

現代IT業界の急速な発展、より多くの労働者、卒業生やIT専攻の他の人々は、昇進や高給などのチャンスを増やすために、プロの70-595試験認定を受ける必要があります。 試験に合格させる高品質のTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験模擬pdf版があなたにとって最良の選択です。私たちのTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010テストトピック試験では、あなたは簡単に70-595試験に合格し、私たちのTS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010試験資料から多くのメリットを享受します。

Microsoft TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010 認定 70-595 試験問題:

1. An existing BizTalk Server 2010 messaging solution for processing orders has a send port group that contains two send ports.
Send Port A is for Supplier A and Send Port B is for Supplier B.
Each supplier receives only one copy of each order message.
The order schema has a promoted property named OrderAmount that contains the total amount of the order.
The send port group subscribes to all messages where a promoted property OrderAmount exists.
The send ports do not have a filter defined. Messages with an order amount less than or equal to 1000 must be sent to Supplier A.
Messages with an order amount greater than 1000 must be sent to Supplier B.
Only a single message can be sent to either Supplier A or Supplier B.
You need to modify the solution to route each order message to either Supplier A or Supplier B.
What should you do?

A) Keep the existing filter condition on the send port group. Add a filter condition on the send port group to subscribe for messages where OrderAmount is <= 1000. Add a filter OR condition on the send port group to subscribe for messages where OrderAmount is > than 1000.
B) Set a filter on Send Port A to subscribe for messages where OrderAmount is <= 1000. Set a filter on Send Port B to subscribe for messages where OrderAmount is > 1000. Stop and start the send port group.
C) Delete the existing filter condition on the send port group. Add a filter condition on the send port group to subscribe for messages where OrderAmount is <= 1000. Add a filter OR condition on the send port group to subscribe for messages where OrderAmount is > 1000.
D) Set a filter on Send Port A to subscribe for messages where OrderAmount is <= 1000. Set a filter on Send Port B to subscribe for messages where OrderAmount is > 1000. Delete the send port group.

2. A BizTalk Server 2010 application is deployed and running. The application has a long-running orchestration with only a single Receive shape that activates the orchestration. There are currently instances of this orchestration in the dehydrated state. You need to make sure that no new orchestration instances are started but that existing instances are allowed to complete. What should you do?

A) Stop the application with the option Partial Stop C Suspend running instances.
B) Stop the application with the option Partial Stop C Allow running instances to continue.
C) Stop all host instances.
D) Suspend any running orchestration service instances.

3. A BizTalk Server 2010 solution transmits messages to a suppliers FTP server. The solution uses an FTP send port. The transport URI points to the main FTP server location. The supplier needs to receive the message immediately if the connection with the main FTP server cannot be established. You need to enable transmission redirection to an alternative FTP server. What should you do?

A) Enable failed message routing for the send port.
B) Set the Retry count to 1. Set the Backup Transport Type to FTP and the Backup Transport URI to the alternative FTP server location.
C) Set the Retry count to 0. Set the Backup Transport Type to FTP and the Backup Transport URI to the alternative FTP server location.
D) Enable ordered delivery for the send port.

4. A BizTalk Server 2010 solution receives invoices in XML format. The solution receives only two types of files: XML files that contain only a single invoice.
The filename of these files starts with the letter S.XML files that contain multiple invoices. The filename of these files starts with the letter M.
You create a receive port with two FILE receive locations. Both receive locations point to the same folder on the file system but each receive location has a different file mask. You configure each receive location to pick up one type of invoice XML. You need to ensure that the single-invoice XML files are processed as soon as possible, and the multiple-invoice XML files are only processed outside of office hours. What should you do?

A) Set the service window of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range. Enable both receive locations.
B) Set the service window of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range. Make sure this receive location is disabled.
C) Set the schedule start date and stop date of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range.
D) In the receive port, delete one of the receive locations. Configure the other receive location to pick up both types of files. Set the service window to reflect the outside office hour time range.

5. You are configuring a BizTalk Server 2010 environment with one server running Microsoft SQL Server for the BizTalk databases and Enterprise Single Sign-On (SSO) store. There are two BizTalk servers. All software has been installed. Both BizTalk servers will share a BizTalk group. You need to complete the installation in this environment. You start the BizTalk Server Configuration wizard on both BizTalk servers.
What should you do next?

A) On BizTalk Server 1, select and apply Basic Configuration. On BizTalk Server 2, select and apply Basic Configuration.
B) On BizTalk Server 1, select Custom Configuration. Create a new SSO system and BizTalk group on the server running SQL Server. On BizTalk Server 2, select Custom Configuration. Create a new SSO system and BizTalk group on the server running SQL Server.
C) On BizTalk Server 1, select Custom Configuration. Create a new SSO system and BizTalk group on the server running SQL Server. On BizTalk Server 2, select and apply Basic Configuration.
D) On BizTalk Server 1, select Custom Configuration. Create a new SSO system and BizTalk group on the server running SQL Server. On BizTalk Server 2, select Custom Configuration. Join the existing SSO system and BizTalk group.

質問と回答：