本当質問と回答の練習モード

現代技術のおかげで、オンラインで学ぶことで人々はより広い範囲の知識（000-587有効な練習問題集）を知られるように、人々は電子機器の利便性に慣れてきました。このため、私たちはあなたの記憶能力を効果的かつ適切に高めるという目標をどのように達成するかに焦点を当てます。したがって、Deployment Professional　000-587練習問題と答えが最も効果的です。あなたはこのIBM FileNet P8 V5.1有用な試験参考書でコア知識を覚えていて、練習中にIBM FileNet P8 V5.1試験の内容も熟知されます。これは時間を節約し、効率的です。

デモをダウンロードする

信頼できるアフターサービス

私たちの000-587試験学習資料で試験準備は簡単ですが、使用中に問題が発生する可能性があります。000-587 pdf版問題集に関する問題がある場合は、私たちに電子メールを送って、私たちの助けを求めることができます。たあなたが新旧の顧客であっても、私たちはできるだけ早くお客様のお手伝いをさせて頂きます。候補者がIBM FileNet P8 V5.1試験に合格する手助けをしている私たちのコミットメントは、当業界において大きな名声を獲得しています。一週24時間のサービスは弊社の態度を示しています。私たちは候補者の利益を考慮し、我々の000-587有用テスト参考書はあなたの000-587試験合格に最良の方法であることを保証します。

要するに、プロの000-587試験認定はあなた自身を計る最も効率的な方法であり、企業は教育の背景だけでなく、あなたの職業スキルによって従業員を採用することを指摘すると思います。世界中の技術革新によって、あなたをより強くする重要な方法はIBM FileNet P8 V5.1試験認定を受けることです。だから、私たちの信頼できる高品質のDeployment Professional有効練習問題集を選ぶと、000-587試験に合格し、より明るい未来を受け入れるのを助けます。

000-587試験学習資料の三つバージョンの便利性

私たちの候補者はほとんどがオフィスワーカーです。あなたはIBM FileNet P8 V5.1試験の準備にあまり時間がかからないことを理解しています。したがって、異なるバージョンの000-587試験トピック問題をあなたに提供します。読んで簡単に印刷するには、PDFバージョンを選択して、メモを取るのは簡単です。 もしあなたがIBM FileNet P8 V5.1の真のテスト環境に慣れるには、ソフト（PCテストエンジン）バージョンが最適です。そして最後のバージョン、000-587テストオンラインエンジンはどの電子機器でも使用でき、ほとんどの機能はソフトバージョンと同じです。IBM FileNet P8 V5.1試験勉強練習の3つのバージョンの柔軟性と機動性により、いつでもどこでも候補者が学習できます。私たちの候補者にとって選択は自由でそれは時間のロースを減少します。

現代IT業界の急速な発展、より多くの労働者、卒業生やIT専攻の他の人々は、昇進や高給などのチャンスを増やすために、プロの000-587試験認定を受ける必要があります。 試験に合格させる高品質のIBM FileNet P8 V5.1試験模擬pdf版があなたにとって最良の選択です。私たちのIBM FileNet P8 V5.1テストトピック試験では、あなたは簡単に000-587試験に合格し、私たちのIBM FileNet P8 V5.1試験資料から多くのメリットを享受します。

IBM FileNet P8 V5.1 認定 000-587 試験問題:

1. A consultant has installed an IBM FileNet Process Engine client fix pack on a 3 node, horizontally load balanced Application Engine installation. After an interactive installation, some users are seeing the same problem intermittently, rather than constantly, as it was before the fix pack was installed. What could still be the issue?

A) The fix pack installer did not delete an application server temp directory.
B) The fix pack install script did not deploy the war file properly.
C) The fix pack install script did not delete an Application Server temp directory.
D) The fix pack did not correct the problem.

2. A customer is upgrading and merging two IBM FileNet P8 domains into a single new IBM FileNet P8 V5.1 domain. One source domain is at IBM FileNet P8 V3.5.2, the other is at IBM FileNet P8 V4.5.1. Both source domains use the same LDAP. What order, if necessary, needs to be followed when upgrading and adding the source domains into the new unified domain?

A) You cannot merge P8 3.5.2 and P8 4.5.1 source domains together while upgrading.
B) There is no order precedence.
C) You must add the P8 V4.5.1 source domain first.
D) You must add the P8 V3.5.2 source domain first.

3. After an upgrade to IBM FileNet P8 V5.1 of a Highly Available BPM installation with Content Engine (CE) in an IBM WebSphere cluster, the administrator discovers an issue with CE. Working with an IBM support representative it is determined that an interim fix for CE needs to be applied. The fix pack EAR file is copied to the CE lib directory and the current EAR file is undeployed. Then the Configuration Manager was used to update the bootstrap information and deploy the application to the Deployment Manager. During testing, the administrator was unable to logon onto the PE. Which next steps should be taken to resolve this issue?

A) Apply the fix to the remaining CE nodes in the cluster rather than the node manager.
B) Review the Patch Compatibility Matrix for supported configurations, review the CE interim fix Readme for pre-requisite and known issues, and reapply the fix using the Fix Pack Readme instructions.
C) Redo the MustGather information, escalate the issue with IBM Support.
D) Contact the IBM Support Representative and open a new PMR for the PE issue, gather the MustGather information related to both the PE and CE, and escalate the CE issue with IBM Support.

4. A highly available IBM FileNet P8 environment has just been installed with horizontally scaled Process Engine (PE) servers using a hardware load balancer. There are currently two PE servers in this farm. There are three Connection Points currently configured, one for PE #1, one for PE #2, and one for the virtual address and port of the farm as defined in the load balancer. Additionally there are load balanced implementations of Workplace XT (WPXT) and Content Engine (CE). Assuming all P8 core components are currently active and appear to be functioning properly, and the Connection Point for the PE farm is currently selected in the WPXT Site Preferences, which of the following is the best choice for validating that all PE servers are responding properly through the load balancer.

A) View the PE Ping Page of the load balancer (i.e. http://<virtual_name>:<virtual_port>/IOR/ping). Continue to refresh this page in the browser until both PE servers respond. View the PE Ping Page of each PE server directly. Compare the results.
B) Open two browsers. In the first browser logon to WPXT and change the Site Preferences by selecting a Connection Point that is configured for PE #1. In the second browser, logon to WPXT, launch a previously created two-step
workflow. Complete the first step of the workflow. In the
first browser select a Connection Point that is configured for PE #2. In the second browser,
complete the second step of the workflow.
C) The required PE session affinity, defined in the load balancer, prevents in-process transactions from failing over to a secondary PE in farmed environment. If a failure occurs, the transaction is rolled-back and the user must restart that transaction upon failing over to a new PE. To test this functionality, begin some PE related work such launching a workflow and just before completing a step, shutdown the active PE. When attempting to complete the workflow step, the user will have to relaunch that step to continue.
D) Shutdown PE #2. Logon via WPXT. Open Process Designer. Create a simple two-step workflow definition. Validate the workflow definition. Start PE #2 and shutdown PE #1. Launch the workflow. Close Process Designer. Complete the first step of the workflow. Start PE #1 and shutdown PE #2. Complete the second step of the workflow.

5. A customer sees the following ping page:

The p8_server_error.log indicates the following message:
2012-05-15T11:20:43.381Z 72D072D0 GCD FNRCE0000W - WARN A database availability issue was encountered when checking the GCD's epoch - using last cached instance. Exception was: The database access failed with the following error: ErrorCode 0, Message 'DSRA9110E: Statement is closed.' SQL: "SELECT last_epoch_id FROM FNGCD WHERE (epoch_id = 0)" 2012-05-15T11:21:14.959Z 521E521E GCD FNRCE0000W - WARN A database availability issue was encountered when checking the GCD's epoch - using last cached instance. Exception was: The server cannot get the data source FNGCDDS.
What could be the probable reason for this failure and what could rectify the issue?

A) Reason: The application server could be down.Resolution: Start the application server, if it is down.
B) Reason: The database server could be down.Resolution: Start the database server, if it is down.
C) Reason: The username/password used for the data source FNGCDDS could be wrong.Resolution: Verify datasource attributes and test the connection to the database.
D) Reason: The LDAP server is down.Resolution: Verify the connection to the LDAP server and start the LDAP server, if it is not up.

質問と回答：